Mobile Pallet Racking

Convenient operation modes

The system comes standard with three modes that are useful for warehousing with forklifts, manual case picking, and inventory work.

• 

  Full width passage mode
  Full width passage mode allows quick forklift access to an aisle. By combining with guide rail and 3-way forklift or order picker forklift, aisle width can be reduced further.

• 

  Half-width passage mode
  Half-width passage mode allows manual case picking in two aisles at the same time.

• 

  Equal Spacing mode
  Equal spacing mode is useful for inventory-taking operation. It is also beneficial for air-conditioning efficiency in cold/frozen warehouse as it provides moderate space between stored items and lets chilled air circulate evenly.

User-friendly interface

The switch used to open and close the passageway has a large hemispherical button that is highly visible and easy to press from any angle. Its user-friendly design, including an operation panel that displays operating status and error details, has been highly evaluated at work sites.

• 

  Operation panel
  Large buttons allow smooth operation while riding the forklift. The operation panel is equipped with operation mode selector switches, an emergency stop button, and a display showing the operation mode and error information.

• 

  Remote controller
  Quick operation from forklift using remote controller.

Safety system for user protection

• 

  Running indicator with buzzer
  A flashing light and an audible sound alert the surrounding workers of the rack's movement.

• 

  Removable safety interlock
  By holding the interlock plate when a worker enters the passage, the system prevents others from releasing the interlock. This system further ensures the safety of picking operators.

• 

  Trespass sensors
  If a forklift or worker enters an unlocked aisle or an aisle where the rack is closing, the sensor automatically stops the rack and locks the system.

• 

  Floor obstacle detector
  Each dolly is equipped with electronic beam bumpers that automatically stop the dolly when it detects an obstacle on the floor. This non-contact system prevents crushing the load or damaging the bumper itself.

• 

  Emergency stop
  In addition to the stop button on the control panel, additional buttons can be installed on posts in the rack aisle or in the work area to further enhance safety.

• 

  Seismograph
  When the seismic sensor detects a tremor that exceeds a set level, the system automatically stops the moving rack. In combination with the seismic isolation characteristics of the dolly itself, this system prevents loads from falling.